Menu

GRP Catch-pit Sump Units

Stirling Sump

PADS Code: 0057/100740

  • Approved for use in the ‘Cess’ or ‘6ft’
  • Installation ideally up to 1.2m’s in total depth
  • Designed to suit AQUA TDK & TDE pipe
  • Designed to suit either PCC or GRP (Derby) Catch-pit Frames
  • Maximum sump depth with 225mm ID pipe = 265mm

Mini-Stirling Sump

PADS CODE: 0004/103023

  • Approved for use in the ‘Cess’ or ‘6ft’
  • Designed specially for use in ‘tight 6ft’ locations 
  • Designed to suit AQUA TDK & TDE pipe
  • Designed for use with either ‘Matisa’ Concrete or ‘Narrow’ GRP Derby frames
  • Maximum sump depth with 300mm ID pipe = 300mm

Luton Sump

PADS Code: 0057/101364

  • Approved for use in both the ‘Cess’ & ‘6ft’
  • Designed specifically for use in ‘tight 6ft’ locations
  • Designed to suit AQUA TDK & TDE pipe
  • Provides an additional 235mm of length over a ‘Mini-Stirling’ or ‘Matisa’ Unit

Watford Sump

PADS Code: 0057/100741

  • Approved for use in the ‘Cess’ or ‘6ft’
  • Installation ideally for applications over 1.2m’s in total depth
  • Designed to suit AQUA TDK & TDE pipe
  • To be installed with either Concrete or GRP Rodding Ledges
  • Designed to suit either PCC or GRP (Derby) Catch-pit Frames
  • Maximum sump depth with 225mm ID pipe = 320mm

Extra Deep Watford Sump

PADS CODE 0057/101365

Designed or use with much larger pipe diameters than with the Watford Unit.

Can also be used when there is a requirement for a greater difference in invert level. 

  • Approved for use in the ‘Cess’ or ‘6ft’
  • Installation ideally for applications over 1.2m’s in total depth
  • Designed to suit AQUA TDK & TDE pipe
  • To be installed with either Concrete or GRP Rodding Ledges
  • Designed to suit either PCC or GRP (Derby) Catch-pit Frames
  • Maximum sump depth with 225mm ID pipe = 490mm
  • Maximum sump depth with 450mm ID pipe = 260mm

 

Durham Sump

PADS CODE: 0057/101431

Due to the increasing need for larger diameter pipes to handle greater catchment areas and climate change factors, the Durham was designed to offer matching sump levels.

  • Approved for use in the 'Cess' and '6ft'
  • Designed specifically for use with larger diameter pipes
  • Can be installed with either concrete or GRP frames
  • Max sump available with 450mm TDK pipe = 520mm

Don't have a login then please click the register button to request access

Aqua Tweets

@aquafabrication

Last week saw a very busy end to the month. Bespoke Aqua G-Plast Headwalls of all shapes and sizes. #bespoke… https://t.co/UOS3S5lHx9
Our innovative G-Plast Headwalls took to a whole new level today as we completed the largest one we have ever attem… https://t.co/gVUD06JKsJ
Another bespoke G-plast headwall with energy dissipator leaving for Gloucester last week. Fabricated to accept Aqua… https://t.co/j83G7yQ3nd
Our orange goliaths are a familiar sight on most Railway sidings and depots around the UK. Aqua Fabrications Heavy… https://t.co/4P1BCL2Mpr